Automotivo Brake Liquid Quickly Tester ADD7706
Brake Fluid Tester ADD7706
The tester can be used as a digital brake fluid tester suitable for determining if the brake fluid should be changed or not, exactly the product can be using for illumination.
How to use:
1, To install the battery. Unscrew the cap of the product in an anticlockwise direction for one time and have it out, paddling the front panel, install the AAA battery better according to the positive sign and then the product is installed well;
2, Toggle the switch from OFF to DOT3, DOT4 or DOT5, then the green LED will light up, and it signifies that the product is entering the test state;
3, Insert the tester into brake fluid reservoir and then the test result will be correctly indicated by LEDS:
<1>green LED: battery is ok, and indicates the water in brake fluid is more than 0.2% and less than 1%, the brake fluid is ok;
<2>yellow LED: indicate that the water in brake fluid is more than 1% and less than 3%, and then the brake fluid should be changed;
<3>red LED: indicate that the water in brake fluid is more than 3%, and then the brake fluid must be changed;
4, Remember to switch OFF after the testing, though the product has owned the function of the automatic intelligent sleep and power- saving.
5, Illumination function: Only need to touch the digital switch next to "Light".
The data listed above is for your reference only.
Battery: one1.5V, type AAA
1, Replace battery if the green LED does not light up any longer after you toggle the switch.
2, Mop the water up from the tester when you finish the test.
3, If the brake fluid is spilled onto the skin of the user, and then thoroughly wash the affected skin with water.
4, Do not expose brake fluid in the atmosphere for a long time as it is highly hygroscopic.